How to open a Metakom intercom without a key and a display: codes and tablets

Video instruction: how to open the combination lock

Any combination lock assumes the ability to open the door without a key. Each of the methods presented here is suitable for certain common Metacom models, so if after the first attempt it was not possible to open the door, proceed to the next method. Try all of the above methods – one of them will definitely work. Note:

  1. Using the apartment code. These models of combination locks are assigned a password for each apartment number in this house. If you know the code cipher of your apartment, dial it and press the call button.
  2. With a universal code. If the installer or other residents of the house did not change it, then the standard combination “1234-B” should be.
  3. Press the call button and dial the number of the first apartment in the entrance. (Just look for the floor plate to identify it.) If you did everything right, COD should appear on the display. Dial the combination 5702, and after a couple of seconds the door will open.
  4. Dial 65535-B. Enter the universal code and press B-8.
  5. Enter the universal code and the combination B-6-B-4568.

The above methods are suitable for code locks with a screen. If you want to figure out how to open a Metakom intercom without a display, use one of these methods:

  • enter the following code: B-27-B-5702, wait a couple of seconds, and the door will open;
  • press B and dial the combination 1-B-4526.

There are special codes that allow you not only to get inside the building without a key, open the door, but also edit the settings of the device itself. For example, you can change the passwords used by the system, delete or bind keys to a specific apartment, change the main entrance code, enter the programming mode, learn how to open the intercom in the user menu. For any action, you need to know the so-called “master code”. The default password for Metacom is 1234.

  1. Opening the door. How to open Metacom without a key? Find out and enter the universal code, press the call button.
  2. Working with keys. You can remove or attach “pills” to a specific apartment. To do this, enter 65535-B-master-code-B-B. Then enter the number. To write down the key, enter B-7. If you want to untie all attached chips from the apartment, press B-7-0-111.
  3. Change system passwords. Using the menu, the tuner can change the universal code of the intercom. To assign a new master password, enter 65535-B-master-code-B-9-3-new password-B. In the same menu, it is possible to change the apartment code. To do this, you need to know the already installed cipher. You are expected to be the owner of the apartment in order to change passwords. Dial the combination 65535B-master code-B-B-apartment number-B-0-new password-B.
  4. Menu entry codes. “Metacom” is equipped with three different catalogs. To enter the standard user menu, enter the combination 65535-B-1234-B-B. Intercom service password: 65535-B-master-code-B. To change system settings, enter 65535-B- master code -B-9.

This short video tutorial gives a simple and clear explanation of how to open the door without a key. In the video, the author unlocks the Metakom model with a display. To use this method, you need to know the number of the first apartment in the entrance. It is very easy to find out – on each porch there is a sign with the numbers of apartments belonging to this part of the building.

How to open a Metakom intercom without a key and a display: codes and tablets

How to open a metacom intercom.

Metacom Features

To open any intercom, you need to understand the principle of its operation. Call panel includes:

  • controller;
  • key reading system;
  • subscriber intercom;
  • and a panel with numbers.

Metacom keys are distinguished by their reliability. It is simply impossible to open the lock of this company with another device. Each key includes a chip with a code that does not change.

The price of Metacom does not bite, and the intercom itself is easy to use.

Shockproof housing protects the device from hacking. The impact of weather conditions, as well as temperature changes, will not damage the Metacom intercom.

Combinations

Now many are looking for an answer to the question of how to open an intercom without a key. Fortunately, there is such a way. And there are several of them, since their combinations are suitable for a certain model. Although there are such algorithms that can fit all Metacom intercoms.

Separate three kinds of menu:

  1. User: “65535” – HF – “1234” – HF – HF.
  2. Service: “65535” – KV – “1234” – KV.
  3. System: “65535” – HF – “1234” – HF – “9”.

Method 1

How to open a Metakom intercom without a key and a display: codes and tablets

What to do:

  1. Call button (SW).
  2. No. of the first apartment in the entrance.
  3. Sq.
  4. “cod” will appear.
  5. “5702”.

Method 2

What to do:

  1. “65535”
  2. Sq.
  3. “1234”.
  4. Sq.
  5. “8”.

Method 3

What to do:

  1. “1234”.
  2. Sq.
  3. “6”.
  4. SQ.
  5. “4568”.

Method 4

(for Metakom MK-20 M/T)

What to do:

  1. Sq.
  2. “27”.
  3. Sq.
  4. “5702”.

Method 5

What to do:

  1. Sq.
  2. “1”.
  3. Sq.
  4. “4526”.
  5. Present a new key and register it.

How to find out the universal code

Metacom assigns its own password for each apartment in the house – it is a set of four digits. The owners are required to know it in order to get into the house even without a key or in another emergency. The password is specified in the agreement with the installer company. There are universal codes for intercoms that are not tied to an apartment.

Without knowing the universal access code, you will not be able to:

  • change it and set a new master password;
  • attach or detach key chips from the apartment;
  • change device system settings;
  • assign a new apartment code;
  • to program the code lock.

Without a master code, you can:

  • open the Metacom intercom without a key;
  • enter the user menu.

Programming

How to open a Metakom intercom without a key and a display: codes and tablets

Signing in with a universal code is not always possible. So the only solution is programming and registering new code.

What to do:

  1. To memorize a new apartment: “65536” – C – sq. no. – “7”.
  2. To remove the old code from this apartment: “65535” – C – “1234” – C – C – sq. no. – KV – “70111”.
  3. Deleting Master Keys: “65535” – C – “1234” – C – “97111”.
  4. Identifier record: “65535” – C – “1234” – C – “99”.
  5. Deletion of the old identifier: “65535” – C – “1234” – C – “990111”.

Important! Now the most popular solution to situations with closed doors is the universal key. All possible firmwares that are used to open intercoms are immediately entered into it.

➤